 |
 | MOPD001M.Pekeler (ACCEL Instruments GmbH)
SRF Capabilities at ACCEL in view of ILC/XFEL |
MOPD002A.J.Favale (Advanced Energy Systems)
Fabrication of ILC Prototype Cavities at Advanced Energy Systems, Inc. |
MOPD003A.J.Favale (Advanced Energy Systems)
ILC Cavity Fabrication Optimization for High Production |
MOPD004T.A.Treado (Communications & Power Industries, Inc.)
CPI RF Components for the ILC |
MOPD005T.Semba (Hitachi Ltd.)
Recent Activities in ILC R&D at Hitachi |
MOPD007H.Downs (Mega Industries, LLC)
Waveguide Directional Couplers for High Vacuum Applications |
MOPD009K.Sennyu (Mitsubishi Heavy Industries,Ltd MHI Kobe Shipyard & Machinery Works)
Status of the Superconducting Cavity Development for ILC at MHI |
MOPD010T.Kato (Nikken Sekkei Ltd.)
Design of XFEL facility in Harima |
MOPD012R.A.Legg (University of Wisconsin-Madison Synchrotron Radiation Center)
Half Wave Injector Design for WiFEL |
MOPD014S.Kaneda (Taiyo Nippon Sanso Corporation Space & Cryogenic Equipment , Engineering Dept.)
First Test Results of ILC/STF Cryogenic System at KEK |
MOPD015M.Niigaki (Toshiba Electron Tubes & Devices Co., Ltd)
Current Status of Development in TETD of High-power Vacuum Microwave Devices |
MOPD016K.M.Baptiste (Lawrence Berkeley National Laboratory Advanced Light Source)
ALS Storage Ring RF System Upgrade |
MOPD017K.B.Beard (Muons, Inc)
G4Beamline Program for Radiation Simulations |
MOPD018I.Birkel (Forschungszentrum Karlsruhe GmbH Institute for Synchrotron Radiation)
Energy Dependent Measurements of Gamma and Neutron Dose at ANKA |
MOPD019E.Cenni (RIAL VACUUM S.p.A)
Construction and Quality Control of Synchrotron SOLEIL Beam Position Monitors |
MOPD022S.Chel (Commissariat à l'Energie Atomique Direction des Sciences de la Matière IRFU)
New 1MW 704MHz RF Test Stand at CEA-Saclay |
MOPD023M.Hess (Indiana University Cyclotron Facility)
Parametric Study of a Novel Coaxial Bunched Beam Space-charge Limit |
MOPD024I.Kirpitchev (Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas)
RF Power System for the IFMIF-EVEDA Prototype Accelerator |
MOPD025S.Lenci (Communications & Power Industries, Inc.)
Status of the 805-MHz Pulsed Klystrons for the Spallation Neutron Source |
MOPD026D.López (Universidad Nacional de Educación a Distancia)
Radiological Hazards Assessment for the Beam Dump of High Intensity Deuteron Accelerators |
MOPD027D.R.Makowski (Technical University of Lodz Department of Microelectronics and Computer Science)
AMC-based Radiation Monitoring System |
MOPD028J.F.Orrett (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
Radio Frequency Power Sources for the Muon Ionisation Cooling Experiment |
MOPD029C.Pardine (Brazilian Synchrotron Light Laboratory)
Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron |
MOPD030L.Scibile (European Organization for Nuclear Research TS Department)
The LHC radiation monitoring system for the environment and safety: from design to operation |
MOPD031A.Piotrowski (Technical University of Lodz Department of Microelectronics and Computer Science)
Automatic Implementation of Radiation Protection Algorithms in Programs Generated by GCC Compiler |
MOPD032I.I.Popova (Oak Ridge National Laboratory Spallation Neutron Source)
Neutronics Calculations to Support the SNS Accelerator Facility |
MOPD033P.Sanchez (Consorci Font de Llum Sincrotron - CELLS)
The ALBA RF Amplifier System Based on Inductive Output Tubes (IOT) |
MOPD034F.Scarpa (Istituto Nazionale di Fisica Nucleare Laboratori Nazionali di Legnaro)
Status of the High Power, Solid-State RF Amplifier Development at Laboratori Nazionali di Legnaro |
MOPD035K.G.Simonov (Federal State Unitary Enterprise "Istok" Dep. 100)
20 MW Pulse Amplifier Klystron with Multiple Frequency Two-Gap Bunching Resonators for Linear Electron Accelerators |
MOPD037F.Valentini (European Organization for Nuclear Research TS Department)
Safety Testing for LHC Access System |
MOPD038K.Casarin (Sincrotrone Trieste S.C.p.A. ELETTRA)
First Radiation Monitoring Results During Elettra Booster Commissioning |
MOPD039K.Casarin (Sincrotrone Trieste S.C.p.A. ELETTRA)
The Personnel Safety System of the Elettra Booster |
MOPD041X.J.Xu (Shanghai Institute of Applied Physics)
The SSRF Radiation Safety Interlock System |
MOPD042Y.Yano (Toshiba Electron Tubes & Devices Co., Ltd (TETD) Electron Tube Engineering Dept.)
Design and Testing of the Horizontal Version of the Multi Beam Klystron for European XFEL Project |
|
| MOPP001E.Adli (European Organization for Nuclear Research AB Department)
Beam-Based Alignment for the CLIC Decelerator |
MOPP002E.Adli (European Organization for Nuclear Research AB Department)
A Study of Failure Modes in the CLIC Decelerator |
MOPP003M.Alabau (Instituto de Física Corpuscular Consejo Superior de Investigaciones Cientificas University of Valencia)
Study of Abnormal Vertical Emittance Growth in ATF Extraction Line |
MOPP005R.Appleby (Cockcroft Institute The University of Manchester Physics and Astronomy Department)
The 2 mrad Crossing Angle Scheme for the International Linear Collider |
MOPP006R.Appleby (Cockcroft Institute The University of Manchester Physics and Astronomy Department)
Machine Induced Backgrounds for FP420 |
MOPP007A.Bungau (The University of Manchester School of Physics and Astronomy)
Wakefield Calculations - Comparison between Simulations and Experimental Data |
MOPP008A.Bungau (The University of Manchester School of Physics and Astronomy)
Design of the Photon Collimators for the ILC Positron Helical Undulator |
MOPP009G.Burt (Cockcroft Institute Lancaster University Engineering Department)
Copper Prototype Measurements of the HOM, LOM and SOM Couplers for the ILC Crab Cavity |
MOPP010R.Corsini (European Organization for Nuclear Research AB Department)
Experimental Studies on Drive Beam Generation in CTF3 |
MOPP011R.Corsini (European Organization for Nuclear Research AB Department)
Fast Vertical Beam Instability in the CTF3 Combiner Ring |
MOPP012A.Descoeudres (European Organization for Nuclear Research TS Department)
DC Breakdown Experiments for CLIC |
MOPP013M.Dohlus (Deutsches Elektronen-Synchrotron MPY)
Coupler Kick for Very Short Bunches and its Compensation |
MOPP015T.Sugimoto (Kyoto University Institute for Chemical Research Advanced Research Center for Beam Science)
Continuously Adjustable Permanent Magnet Quadrupole for a Final Focus |
MOPP016F.Jackson (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
Collimation Aperture for the Beam Delivery System of the International Linear Collider |
MOPP017F.O.Arntz (Diversified Technologies, Inc.)
A Kicker Driver Exploiting Drift Step Recovery Diodes for the International Linear Collider |
MOPP022M.W.McGee (Fermi National Accelerator Laboratory)
Transatlantic Transport of Fermilab 3.9 GHZ Cryomodule for TTF/FLASH to DESY |
MOPP023A.A.Mikhailichenko (Cornell University Department of Physics R.R. Wilson Synchrotron Laboratory)
Test of Short Period SC Undulator |
MOPP024G.A.Moortgat-Pick (Durham University Physics Department)
Depolarization and Beam-beam Effects at the Linear Collider |
MOPP025T.Naito (High Energy Accelerator Research Organization)
Design of the Beam Extraction by Using Strip-line Kicker at KEK-ATF |
MOPP027J.Resta-López (John Adams Institute)
Placet Based Start-to-end Simulations of the ILC with Intra-train Fast Feedback System |
MOPP028G.Riddone (European Organization for Nuclear Research AB Department)
Technical Specification for the CLIC Two-Beam Module |
MOPP029T.Saeki (High Energy Accelerator Research Organization)
The First Measurement of Low-loss 9-cell Cavity in a Cryomodule at STF |
MOPP030A.Scarfe (Cockcroft Institute The University of Manchester Physics and Astronomy Department)
ATF2 Final Focus Orbit Correction and Tuning Optimisation |
MOPP031A.Seryi (SLAC National Accelerator Laboratory)
Challenges and Concepts for Design of an Interaction Region with Push-pull Arrangement of Detectors - an Interface Document |
MOPP034I.R.R.Shinton (Cockcroft Institute The University of Manchester Physics and Astronomy Department)
Large Scale Linac Simulations Using a Globalised Scattering Matrix Approach |
MOPP035G.Shirkov (Joint Institute for Nuclear Research)
ILC Siting in Dubna Region (Russia) and ILC activity in JINR |
MOPP036N.Solyak (Fermi National Accelerator Laboratory)
Dark Current Model for ILC Main Linac |
MOPP037A.Latina (European Organization for Nuclear Research AB Department)
Alignment of the CLIC BDS |
MOPP038R.Tomas (Brookhaven National Laboratory Collider-Accelerator Department)
Optimizing the CLIC Beam Delivery System |
MOPP039G.R.White (SLAC National Accelerator Laboratory)
Beam-Based Alignment, Tuning and Beam Dynamics Studies for the ATF2 Extraction Line and Final Focus System |
MOPP042V.P.Yakovlev (Fermi National Accelerator Laboratory)
RF Kick in the ILC Acceleration Structure |
MOPP043V.P.Yakovlev (Fermi National Accelerator Laboratory)
Transverse Wake Field Simulations for the ILC Acceleration Structure |
MOPP044Y.Yamamoto (High Energy Accelerator Research Organization)
Cavity Diagnostic System for the Vertical Test of the STF Baseline 9-cell Cavity at KEK |
MOPP045R.Zennaro (European Organization for Nuclear Research AB Department)
Study of the Validity of K. Bane's Formulae for the CLIC Accelerating Structure |
MOPP046F.Zhou (SLAC National Accelerator Laboratory)
Collimation Optimizations, Capture Efficiency, and Primary-Beam Power Loss in the ILC Positron Source |
MOPP047F.Zhou (SLAC National Accelerator Laboratory)
Simulation Studies on the Vertical Emittance Growth at the Existing ATF Extraction Beamline |
MOPP048G.Rumolo (European Organization for Nuclear Research AB Department)
Fast Ion Instability in the CLIC Transfer Line and Main Linac |
MOPP049G.Rumolo (European Organization for Nuclear Research AB Department)
Collective Effects in the CLIC Damping Rings |
MOPP050G.Rumolo (European Organization for Nuclear Research AB Department)
Electron Cloud Build Up and Instability in the CLIC Damping Rings |
MOPP051K.M.Hock (Cockcroft Institute)
Effect of Fill Patterns on Extraction Jitter in Damping Rings |
MOPP055J.K.Jones (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
A Comparison of Tuning Strategies for a Linear Collider Damping Ring |
MOPP056M.Korostelev (Cockcroft Institute)
Beam Coupling Impedance in the ILC Damping Rings |
MOPP057O.B.Malyshev (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
ILC DR Vacuum Design and E-cloud |
MOPP059K.Ohmi (High Energy Accelerator Research Organization)
Study for ILC Damping Ring at KEKB |
MOPP060Y.Papaphilippou (European Organization for Nuclear Research AB Department)
Parameter Scan for the CLIC Damping Rings |
MOPP061Y.Papaphilippou (European Organization for Nuclear Research AB Department)
Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators |
MOPP062Y.Papaphilippou (European Organization for Nuclear Research AB Department)
Optics Design Considerations for the CLIC Pre-damping Rings |
MOPP063M.T.F.Pivi (SLAC National Accelerator Laboratory Next Linear Collider Dept.)
A New Chicane Experiment in PEP-II to Test Mitigations of the Electron Cloud Effect for Linear Colliders |
MOPP064M.T.F.Pivi (SLAC National Accelerator Laboratory Next Linear Collider Dept.)
Secondary Electron Yield Measurements and Groove Chambers Update Tests in the PEP-II Beam Line |
MOPP065M.T.F.Pivi (SLAC National Accelerator Laboratory Next Linear Collider Dept.)
Microwave Transmission Measurement of the Electron Cloud Density in the Positron Ring of PEP-II |
MOPP066N.Terunuma (High Energy Accelerator Research Organization)
Recent Experimental Study of Fast Ion Instability in ATF Damping Ring |
MOPP067K.G.Panagiotidis (Cockcroft Institute)
Coupling Correction Simulations for the ILC Damping Rings |
MOPP068G.X.Xia (Deutsches Elektronen-Synchrotron FLC)
Simulation Study of Fast Ion Instability in the ILC Damping Ring |
MOPP069I.R.Bailey (The University of Liverpool Department of Physics)
A Prototype Target Wheel for the ILC Positron Source |
MOPP070J.A.Clarke (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source |
MOPP071M.A.C.Cummings (Muons, Inc)
Intense Stopping Muon Beams |
MOPP072L.J.Jenner (Cockcroft Institute)
A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target |
MOPP073S.A.Kahn (Muons, Inc)
Plasma Lens for Muon and Neutrino Beams |
MOPP074A.Murata (Waseda University Advanced Research Institute for Science and Engineering)
Improvement of an S-band RF-gun cavity with a Cs-Te Photo-cathode |
MOPP075P.Musumeci (University of California, Los Angeles Physics Department)
Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions |
MOPP076S.Nagaitsev (Fermi National Accelerator Laboratory)
L-Band RF Gun with a Thermionic Cathode |
MOPP078J.Yang (Osaka University The Institute of Scientific and Industrial Research)
Femtosecond Photocathode Electron Source |
MOPP079L.Zang (Cockcroft Institute)
Studies on the Role of a Photon Collimator for the ILC Positron Source |
MOPP080M.BastaniNejad (Old Dominion University)
Studies of Breakdown in a Pressurized RF Cavity |
MOPP081D.Carrillo (Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas)
Engineering Design of a PETS Tank Prototype for CTF3 Test Beam Line |
MOPP083V.A.Dolgashev (SLAC National Accelerator Laboratory)
Status of High Power Tests of Normal Conducting Single-cell Structures |
MOPP084A.Fabris (Sincrotrone Trieste S.C.p.A. ELETTRA)
Installation and Commissioning of the RF System for the New Elettra Booster |
MOPP085R.H.A.Farias (Brazilian Synchrotron Light Laboratory)
Bench Characterization of a Prototype of a 3rd Harmonic Cavity for the LNLS Electron Storage Ring |
MOPP086P.Frigola (RadiaBeam Technologies)
A Novel Fabrication Technique for the Production of RF Photoinjectors |
MOPP087Q.Gu (Shanghai Institute of Applied Physics)
RF System for the SSRF Booster Synchrotron |
MOPP088R.G.Heine (GSI Helmholtzzentrum f. Schwerionenforschung mbH)
The High Harmonics Cavity System for the New Experimental Storage Ring at FAIR |
MOPP090S.A.Kahn (Muons, Inc)
Incorporating RF into a Muon Helical Cooling Channel |
MOPP091Y.W.Kang (Oak Ridge National Laboratory Spallation Neutron Source)
Upgrade of Input Power Coupling System for the SNS RFQ |
MOPP092Y.W.Kang (Oak Ridge National Laboratory Spallation Neutron Source)
Efficient Fan-out RF Vector Control Algorithm |
MOPP093S.Kazakov (Omega-P, Inc.)
Fast L-band Waveguide Phase Shifter |
MOPP094H.G.Koenig (GSI Helmholtzzentrum f. Schwerionenforschung mbH)
Reduction of Q-loss-effects in Ferrite-loaded Cavities |
MOPP095J.W.Kovermann (Rheinisch-Westfälische Technische Hochschule Physics group Physics Centre)
Advanced Experimental Techniques for RF and DC Breakdown Research |
MOPP096Yu.A.Kubyshin (Universitat Politécnica de Catalunya Institut de Techniques Energétiques)
C-band Linac Optimization for a Race-track Microtron |
MOPP097M.L.Langlois (Consorci Font de Llum Sincrotron - CELLS)
Measurements on the Rf Cavity for the ALBA Storage Ring |
MOPP098D.Li (Lawrence Berkeley National Laboratory Accelerator and Fusion Research)
A 201-MHz Normal Conducting RF Cavity for the International MICE Experiment |
MOPP099A.J.Moss (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
MICE RF System |
MOPP100V.V.Mytrochenko (National Science Centre Kharkov Institute of Physics and Technology)
Performance of Compact Electron Injector on Evanescent Oscillations |
MOPP102C.Ohmori (High Energy Accelerator Research Organization)
High Field Gradient RF System for a Spiral FFAG, RACCAM |
MOPP103C.Ohmori (High Energy Accelerator Research Organization)
High Field Gradient RF System for Bunch Rotation in PRISM-FFAG |
MOPP104C.Ohmori (High Energy Accelerator Research Organization)
Possible Upgrade Scenario for J-PARC Ring RF |
MOPP105M.Popovic (Fermi National Accelerator Laboratory Accelerator Division)
Compact, Tunable RF Cavities |
MOPP106R.Sandstrom (Geneva University Nuclear and Corpuscular Physics Department)
Study of Radiation From RF Cavities |
MOPP108V.Serriere (European Synchrotron Radiation Facility)
Status of HOM Damped Room-temperature Cavities for the ESRF Storage Ring |
MOPP109A.Falone (Consorci Font de Llum Sincrotron - CELLS)
Status of the 100 MeV Preinjector for the ALBA Synchrotron |
MOPP110D.C.Williams (Oak Ridge National Laboratory Spallation Neutron Source)
The SNS Resonance Control Cooling System Control Valve Upgrade Performance |
MOPP111H.Z.Zimmermann (Ludwig-Maximilians-Universität Physics Department)
Beam Tests with the MAFF IH-RFQ at the IAP-Frankfurt |
MOPP112S.An (Korea Atomic Energy Research Institute)
Status of the PEFP Superconducting RF Project |
MOPP113S.An (Korea Atomic Energy Research Institute)
PEFP Dumbbell Frequency and Length Tuning of a Low-beta SRF Cavity |
MOPP114S.Barbanotti (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
Design of the Prototypical Cryomodule for the EUROTRANS Superconducting Linac for Nuclear Waste Transmutation |
MOPP115S.Barbanotti (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules |
MOPP116S.A.Belomestnykh (Cornell University Cornell Laboratory for Accelerator-Based Sciences and Education F.R. Newman Laboratory)
Commissioning of the Cornell ERL Injector RF Systems |
MOPP117S.A.Belomestnykh (Cornell University Cornell Laboratory for Accelerator-Based Sciences and Education F.R. Newman Laboratory)
First Test of the Cornell Single-cavity Horizontal Cryomodule |
MOPP120A.Bosotti (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
Full Characterization of the Piezo Blade Tuner for Superconducting RF Cavities |
MOPP121A.Canabal (Los Alamos National Laboratory)
Full Real-time Temperature Mapping System for 9-cell ILC-type Cavities |
MOPP123E.P.Chojnacki (Cornell University Cornell Laboratory for Accelerator-Based Sciences and Education F.R. Newman Laboratory)
Design and Fabrication of the Cornell ERL Injector Cryomodule |
MOPP124E.Ciapala (European Organization for Nuclear Research AB Department)
Commissioning of the 400 MHz LHC RF System |
MOPP125P.A.Corlett (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
A Superconducting RF Vertical Test Facility at Daresbury Laboratory |
MOPP126G.Devanz (Commissariat à l'Energie Atomique Direction des Sciences de la Matière IRFU)
Experimental Characterization of a 700 MHz \beta=0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac |
MOPP127S.Ghosh (Inter University Accelerator Centre)
Commissioning of Superconducting Linac at IUAC - Initial Challenges and Solutions |
MOPP128P.Goudket (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
Comparison of Stretched-wire, Bead-pull and Numerical Impedance Calculations on 3.9 GHz Dipole Cavities |
MOPP129M.K.Grecki (Technical University of Lodz Department of Microelectronics and Computer Science)
Compensation of Lorentz Force Detuning for SC Linacs (with Piezo Tuners) |
MOPP130R.Myneni (Thomas Jefferson National Accelerator Facility)
SRF Technology-Past, Present and Future Options |
MOPP131E.Kako (High Energy Accelerator Research Organization)
Cryomodule Tests of the STF Baseline 9-cell Cavities at KEK |
MOPP132A.Kanareykin (Euclid TechLabs, LLC)
Progress Towards Development of an L-Band SC Traveling Wave Accelerating Structure with Feedback |
MOPP135T.N.Khabiboulline (Fermi National Accelerator Laboratory Technical Division)
Vertical and Horizontal Test Results of 3.9 GHz Accelerating Cavities at FNAL |
MOPP136P.Kneisel (Thomas Jefferson National Accelerator Facility)
Performance of Single Crystal Niobium Cavities |
MOPP137Y.M.Li (Korea Atomic Energy Research Institute)
MultiPac 2.1 - Multipacting Simulation Package with a 2D FEM Field Solver for a Microsoft Windows System |
MOPP138M.Liepe (Cornell University Cornell Laboratory for Accelerator-Based Sciences and Education F.R. Newman Laboratory)
First Test Results from the Cornell ERL Injector Cryomodule |
MOPP140F.Marhauser (Thomas Jefferson National Accelerator Facility)
Status and Test Results of High Current 5-cell SRF Cavities Developed at JLAB |
MOPP141P.A.McIntosh (Science and Technology Facilities Council Daresbury Laboratory Accelerator Science and Technology Centre)
Commissioning of the ERLP SRF Systems at Daresbury Laboratory |
MOPP144N.Ohuchi (High Energy Accelerator Research Organization)
The First Cool-down Tests of the 6 Meter-Long-Cryomodules for Superconducting RF Test Facility (STF) at KEK |
MOPP146A.Bosotti (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
The Coaxial Tuner for ILCTA{_}NML at Fermilab |
MOPP148P.Pierini (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
Design of a Magnetic Shield Internal to the Helium Vessel of SRF Cavities |
MOPP149H.Podlech (Goethe Universität Frankfurt Institut für Angewandte Physik)
Recent Developments of the Superconducting CH-Cavities |
MOPP152J.Rose (Brookhaven National Laboratory)
Bunch Lengthening Harmonic System for NSLS-II |
MOPP153H.Sakai (University of Tokyo Institute for Solid State Physics Synchrotron Radiation Lab.)
Cavity Diagnostics Using Rotating Mapping System for L-band ERL Superconducting Cavity |
MOPP154D.Sertore (Istituto Nazionale di Fisica Nucleare Laboratorio Acceleratori e Superconduttivita Applicata)
Study of the High Pressure Rinsing Water Jet Interactions |
MOPP155J.Shi (Tsinghua University in Beijing Accelerator Laboratory Department of Engineering Physics)
Superconducting RF Deflecting Cavity Design and Prototype for Short X-ray Pulse Generation |
MOPP156J.Shi (Tsinghua University in Beijing Accelerator Laboratory Department of Engineering Physics)
Fabrication and Low Power Testing of an L-band Deflecting Cavity for Emittance-exchange at ANL |
MOPP157A.Canabal (Los Alamos National Laboratory)
Critical Magnetic Field Determination of Superconducting Materials |
MOPP158T.Tajima (Los Alamos National Laboratory)
Conceptual Design of Automated Systems for SRF Cavity Optical Inspection and Assembly |
MOPP159K.Umemori (High Energy Accelerator Research Organization)
Results of Vertical Tests for the KEK-ERL Single Cell Superconducting Cavities |
MOPP161M.Raskovic (Old Dominion University Department of Physics)
Plasma Etching Rates and Surface Composition of Bulk Nb Treated in Ar/Cl2 Microwave Discharge |
MOPP162A.Variola (Laboratoire de l'Accélérateur Linéaire)
Titanium Nitride Coating of RF Ceramic Windows by Reactive DC Magnetron Sputtering |
MOPP164J.L.Wiener (Cornell University)
Improvements in Field Emission: A Statistical Model for Electropolished Baked Cavities |
MOPP165E.N.Zaplatin (Forschungszentrum Jülich GmbH Institut für Kernphysik)
FZJ Smallest SC Triple-Spoke Cavity |
MOPP166L.Zhang (Korea Atomic Energy Research Institute)
Control System for a PEFP FPC Baking System |
MOPP168Z.G.Zong (Chinese Academy of Sciences Institute of High Energy Physics)
Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP |
Photos
15:00)